Mar 23 2010

Support

faenil @ 1:21 am

If you need to ask anything related to this blog or my custom firmwares, feel free to contact me at:

faenil@i8910tuning.com

287 Responses to “Support”

« Older Comments
  1. riaztheboss007 says:
    February 6th, 2011 5:31 am

    Sorry to disturb you faenil. But is there anyway to keep the phone phone dimmed like the 10% battery saver mode, even when the battery is full? It’ll be handy to read pdfs for hours. And can I use HX-pather in your firmware???

  2. faenil says:
    February 6th, 2011 11:00 am

    you could try disabling sensors :) that should make your battery last longer…

    about hx-patcher you can use it, yes

  3. riaztheboss007 says:
    February 13th, 2011 6:17 am

    well, faenil, will it harm my phone’s hardware or software if I use the 600 MHz proccessor boost for quite a long time (like 2-3 hours)??

    • faenil says:
      February 13th, 2011 11:10 am

      no it won’t, but I suggest not to overclock it over 700-750mhz

      • Nathan says:
        June 14th, 2011 2:26 pm

        I consistently run my i8910 at 900mhz without any issues whatsoever… only downside is decreased battery life when not in standby. Like when I use Opera browser through a WiFi connection, I only get about 3 hours from a fully charged battery.
        Hope this helps :)

  4. Dave says:
    February 20th, 2011 1:54 pm

    Feanil your the best modder i see so far… could i suggest to the next update of omnia hd, could you include threaded sms as a default one? hehehehe i lke these phone so much… tnx a lot more power!!!!

    • Dave says:
      February 20th, 2011 2:03 pm

      and feanil can i ask something i download from your site these is the app facebook vivaz? when i try to install it is keep saying that jad and jar file attribute do not match? tnx for the reply

  5. inistine says:
    March 1st, 2011 12:57 pm

    hi mr faenil can u tell me how to put the rnd file browser in the phone without flashing it can u put it in a sis file too like the mods for n8 thnx in advance

  6. Hasan says:
    March 9th, 2011 9:59 pm

    dear faenil
    i downloaded your custom firmware with arabic localization for my omnia hd ,and every thing works perfect ,exept that media player does not recognise any music file in my phone ! please tell me what to do?

  7. Lock says:
    March 25th, 2011 4:14 am

    Hi Faenil just a quick question is there any chance that you are able to incorporate LEAP & WPA Enterprise authentication, as part of the wireless setup as currently is a real pain

  8. Ivan says:
    March 27th, 2011 12:05 am

    Hi! Faenil, I have a problem with N8. I wanted to install your H2O mod but it says Unable to install application from untrusted supplier…Yes, I signed it properly. Is it possible that something from the previous mods that I have deleted is left…should I flash my phone or what should I do?

  9. malchik-solnce says:
    March 28th, 2011 7:33 pm

    hallo Faenil. Ich kann Dir helfen.

  10. KoT says:
    April 3rd, 2011 6:55 pm

    Привет, Faenil, я администратор сайта http://www.badapps.ru и у меня есть несколько идей и предложений к тебе! Прошу связаться со мной по email.
    Пишу на русском так как мой английский слаб.
    Жду письма на адрес kot@badapps.ru
    Спасибо!

  11. KoT says:
    April 3rd, 2011 7:02 pm

    Hello, Faenil, I’m administrator http://www.badapps.ru site and I have a few ideas and suggestions to you! Please contact me by email.
    I write in Russian because my English is bad.
    Write me for my email address kot@badapps.ru or ICQ: 448-936-661
    Thank you!

  12. malchik-solnce says:
    April 3rd, 2011 8:16 pm

    Faenil, please tell me you could make Ovi Maps for our phone? http://dimonvideo.ru/uploader/329789

  13. i8910-facebooker says:
    April 6th, 2011 9:37 pm

    Hi there,

    i can’t use the facebook app from the vivaz theres always the same error: ” the process can not be finisched”

    ANY SOLUTIONS?

  14. lengyel_a says:
    April 7th, 2011 8:22 am

    Hi faenil,

    I have been using Your n2o4 firmware for a long time (hungarian langpack), it is a great firmware. The only thing I ran into is, that I cannot write an email in landscape mode (so with full QWERTY) only in portrait mode (it wont rotate). With normal text messages it works.
    Could you give a solution for this?
    Thanks a lot!

  15. Barflyer says:
    April 14th, 2011 9:06 am

    Hi faenil, thanx for fantastic phoneware! Three questions though:
    1) When I click on the current profile on the homescreen I open a drop-down-menu for other profiles to choose from. Problem is that none of these profiles can be activated, they can just be highlighted on the drop-down-menu wich will not close. What can be done?

    2)How can nav3d and task3d be activated in n204 without PowerBoot?

    3)How can I get all 4 icons at the bottom of the screen when in FingerUse-mode also on the Menu-screen?

    Thank you!

  16. foni says:
    May 11th, 2011 11:07 am

    Hi. why can’t I acsess my music file in my mamory card from the musicplayer

  17. abc says:
    May 18th, 2011 9:40 pm

    hi!! i bought a new nokia n8.
    is it fine to hack it ?

  18. Paulgo says:
    June 8th, 2011 3:02 pm

    Hi there Faenil. Looks like you really know what ur doin with firmware. Is there a way to change the default directories for common file caches like SMS etc? These chew up quite a bit of ram and slow down the GUI. What files can I remove from the core drive without affecting performance negatively?

    Thankyou

  19. riaztheboss007 says:
    July 1st, 2011 1:50 pm

    my i8910 is having a problem now. from time to time it autometically goes to the USB connection mode even if I don’t connect it to any USB. SO, I can’t do anything in that mode. is there any solution to this? I tried a hard reset. but didn’t work.

    please help anyone if faenil bro is too busy…

  20. skizzo_d says:
    July 12th, 2011 7:54 am

    what is the password to download the rom?
    my password did not start any downloads!

  21. minoru89 says:
    July 13th, 2011 6:09 pm

    I found a dead link on “FLASHING KIT”, which can be found in link below:
    http://i8910tuning.com/tutorials/how-to-flash-my-roms/

    I hope that you could fix this since I believe it is very useful.
    Thank you for your hard work and dedication

  22. i8910-Lover says:
    July 15th, 2011 10:48 am

    Hey there,

    first real good job with the new n205-firmware it’s awesome!!!

    But i got 1 question. i want to install the orginal theme from the i8910 but i can’t because the phone allways tells me that this theme is allready installed because it thinks that your theme is the Samsung Omnia HD Universal Original Theme.

    Any solution how i can fix this??

    Thanks alot ;)

    • faenil says:
      July 15th, 2011 3:53 pm

      you can’t install original universal theme because there one file of it which is included in all custom firmwares…you have to install a modded version of it ;)

  23. Greenhorn2013 says:
    July 16th, 2011 6:06 am

    I get Error-33 on QT installation

  24. caduoli says:
    July 19th, 2011 2:52 pm

    Help! installed and everything went right, except that the keyboard no longer appears for me to type messages, contacts, etc. .. the numeric keypad to dial appears … ‘ve reinstalled and nothing …

  25. bluegrass says:
    July 21st, 2011 10:35 pm

    Hi,

    I installed this over HX-V11 but the phone keeps freezing and exiting from applications.

    I hard rest the E drive before install. Did I need to do format the C drive before installing your firmware?

    Thanks.

  26. Jack says:
    July 28th, 2011 9:07 pm

    N205 is the best. I did not have the reboot problem with N205 until i installed mp3 players – both 360ting and TTPOD. There might be something conflicting in those apps. Hope this helps track down the reboot problem.

  27. winzeven says:
    August 1st, 2011 1:34 pm

    Ciao Faenil, volevo chiederti un consiglio, visto che ancora non ne sono venuta a capo pur cambiando diversi firmware non risolvo il problema.
    Con il Firmware originale tutto funziona, ma se metto altri firm.. pure con il n205 la
    prima chiamata risulta sempre occupato alla seconda il telefono mi squilla.
    Mi consigli una soluzione o un firmware per il modem che non da problemi?
    Mi fai avere il firmware del modem che usano nelle versioni originali, sperando ri risolvere il fastidioso problemino? :-) buon lavoro e buon Studio, baci :-)

    • faenil says:
      August 1st, 2011 1:37 pm

      non saprei come aiutarti, mi spiace…

      ps se il modem non l’hai cambiato, è rimasto quello che avevi prima, non cambia quandi flash il firmware, devi flashare un altro file apposta per cambiare il mode ;)

  28. jeenlee18 says:
    August 5th, 2011 5:32 pm

    Ciao Faenil,
    ho un grande favore da chiederti, allora ho provato e straprovato a far leggere dal pc il cell in modalita’ bootloader e non riesco proprio, si vede che con windows 7 x64 non va…devo quindi per forza installare windows xp?

  29. jeenlee18 says:
    August 5th, 2011 5:41 pm

    si, ma il discorso e’ che ho gia’ fatto la macchina virtuale ma se il 7 non lo legge, non va neanche con virtualbox :|

    • jeenlee18 says:
      August 5th, 2011 5:42 pm

      ops. scusa dovevo fare reply…ma c’ho le palle che toccano terra… ormai..con sto cell..

      • faenil says:
        August 5th, 2011 5:45 pm

        quando hai attaccato il telefono via usb devi fare qualcosa sulla macchina virtual per far trasferire il cellulare da Win7 alla macchina virtuale.

        Sulla XPMode mi sembrà c’è direttamente in alto “Usb” o “Devices” non ricordo…clicchi lì, poi clicchi Attach affianco al cellulare (che nel mio caso mi sembra si chiami USB Driver).

        Prima di fare ciò ovviamente devi far partire l’exe del firmware sulla macchina virtuale

        • jeenlee18 says:
          August 5th, 2011 5:52 pm

          si giusto…e fino a qua ci sono, infatti se il telefono e’ acceso ho l’opzione i8910 come usb da trasferire nei diveces perche’ e’ l’windows 7 che inanzitutto lo legge, ma se l’ho metto in bootloader il 7 mi da not recognized e di conseguenza nella virtual non c’e’ neanche…capito adesso?

  30. yodiyo says:
    August 7th, 2011 3:25 pm

    Hi Faenil. I hope you’re well. I have made a small contribution to thank you for all your hard work. n205 is behaving quite well in the phone.

    However, I am having a problem installing QT apps, probably something to do with the Nokia Smart(!) Installer. They keep failing to install – well, it maybe the NSI fails to install properly as it appears in Installed apps but there’s no icon in Applications.

    i8910 Tuning and Wikitude work so QT seems to be ok. Has this been a problem for anyone else and do you have any ideas for a solution?

    Many thanks

    • faenil says:
      August 7th, 2011 3:26 pm

      thank you very much! :)

      Sorry but I can’t help with that…NSI seems to have lots of problems on non official firmwares, don’t know what they’re related to..

  31. HoopZ says:
    August 7th, 2011 5:00 pm

    Guys i need serious help.The problem is that i changed i8910 lock code and now i can’t remember it.I can’t even turn the phone on because it always asks me for that code which i don’t know.Is there any way to reset it to 8×0 like it was in the beginning by flashing with some firmware because in the past some firmwares used to reset it.Thanks

  32. Marpscruz says:
    August 12th, 2011 7:45 pm

    Hi Faenil and everybody. Thanks for great FW and apps. I´ve got a question about connecting to PC. It is no problem with connection i8910 with n205 using bluetooth, but with cable I don´t see any additional external disc in Linux, even Memory Card and also cannot connect by cable using Samsung PC Studio 7. I can connect it into Samsung PC Studio 7 by bluetooth only.
    Another think is Music player: My songs are stored on Memory Card and Music player has nothing in Library. I cannot attach any song into Library. Thanks for any help or suggestion.

  33. vish_lal says:
    August 23rd, 2011 5:03 am

    Hi Faenil!
    Extremely happy with N205! I’m a first time flasher, so actually wasn’t sure about going for it but took a chance and i’m happy that i flashed my phone. I’m getting so much more out of my i8910 now. However, there seems to be an issue with my system sound. Suddenly the sound reduces to nil and one can hardly hear anything, when toggle the volume key, it shows 100% in the music player but negligible sound. I have to reboot the phone and the sound comes up, but after sometimes its silent again. What could be the reason behind this? I followed the instructions on the download page step by step. Can you find a solution for this issue, coz all of us know how important sound is on the i8910.

    Appreciate your help.
    Thanks in advance!

  34. hulk85 says:
    September 7th, 2011 11:27 pm

    Hi faenil, I flashed like you mentioned in your tutorial, but I can’t start the i8910 tuning app. If i try to start it the screen gets black for 4 seconds and then I’m back in menu. The same thing happens with “StartBackup”. Other apps are working fine (like PhoneTorch or RomPatcher). I’ve installed Euro language pack (German) and then n2o5_mustHave.sis, but nothing else. Any idea what is wrong?

  35. beyazadam says:
    September 13th, 2011 6:27 am

    Sorry my bad english.
    I’m install N205 and phone is working but i can not install Turkis language pack.
    I’m plug USB cable on blue screen but phone is not detected.
    I’m stuck and i dont install OFW or other CFW.

  36. bluegrass says:
    September 22nd, 2011 2:48 am

    Hi Faenil,

    I have a problem installing Roadsync 5. It keeps saying that this version of Road sync is not for this phone but it does install in the HX firmware.

    Is there anything I can install from HX patcher to enable this?

    I want to use your firmware because it’s very stable.

  37. feifelm1983 says:
    October 25th, 2011 10:32 pm

    do you create a n2o6 in the near future?

  38. Anto says:
    October 27th, 2011 1:11 pm

    Ciao Faenil,
    dove si può scaricare l’applicazione SmartReader?
    Grazie

« Older Comments

Leave a Reply

You must be logged in to post a comment. Login now.